Before returning this product to the store of purchaseContact Dee Zee if you experience the following problems: •MissingParts •Installat
Loosely attach the rear brace to the mounting bracket using the 8mm bolt [H] and 8mm nut [K]in the top slot of the mounting bracket.Use the top slotin
Line the bolts in the running board up with the slots in the braces.Place the board on the braces with the bolts through the brace slots.Slide the boa
Dee Zee Running Board Installation InstructionsCongratulations on your purchase of a quality Dee Zee product. Dee Zee isrecognized as having the highe
BRACKETDZ 16201DZ 16202DZ 16203X2B 2045PX4PN 197X4BRACEBRACEB 2047LPX1B 2047RPX1BRACEBRACE*SOLD SEPARATELY FROM THIS KIT*FDRIGHT FRONTGLEFT REARERIGHT
WRENCH/RATCHET10 mm, 13mmTAPEMEASUREFind the front and rear mounting location in the pinch weld as shown below. The driver's side is shown.TOOLS
At each mounting location place a bolt plate into the holes in the pinch weld with thebolt studs pointing towards the outside of the vehicle.Attach mo
Thread the 8mm bolt [H] into the small threaded plate [M] through the back hole in the leftfront brace.FRONT DRIVER SIDE BRACENOTE: Thread the bolt in
Shown below is the front driver's side mounting location. The small threaded plate [M] willbe installed in the hole shown below. The bottom slo
Loosely attach the front brace to the mounting bracket using the 8mm bolt [H] and 8mm nut [K]in the bottom slot of the mounting bracket.Use the bottom
Insert the large threaded plate that was installed on the driver's side rear brace [F] into theslot on the underside of the vehicle just behind t
Comments to this Manuals