Dee-zee DZ371231 User Manual download pdf (Page 2)

INSTALLATION INSTRUCTION

SIDE BAR PART#DZ 371231/371232/371233

02-07 Dodge Pickup Ram Quad Cab

1500/2500/3500

QTY DESCRIPTION

1 Side Bar, left side

1 Side Bar, right side

1 Hardware kit

NOTE: Please read this information before installing. Check components received with components listed

above.

Step One: Locate hardware kit. Check contents with the hardware listed below.

QTY DESCRIPTION

2 front mounting bracket-short

2 rear mounting bracket-long

2 front support bracket

2 rear support bracket

2 rear bolt plate

2 1/2” x 1-1/2 hex bolt zinc plated

4 3/8” x 1-1/2 hex bolt zinc plated

10 3/8” flat washer-zinc plated

6 3/8” split lock washer-zinc plated

6 3/8 x 16 hex nut-zinc plated

2 1/2” x 13 hex nut-zinc plated

4 1/2” x 2” hex bolt-zinc plated

10 1/2” lock washer-zinc plated

12 1/2” flat washer-zinc plated

4 12mm x 120mm Hex Bolt-zinc plated

4 Spacer Plates

4 3” Plastic Rings

Step Two: Remove the front and rear body mount bolts.

Step Three: Locate the two short mounting brackets and loosely install them to the front body mount locations

with the 12mm x 120mm bolts, 1/2” flat and lock washers, and spacer plates as per fig 1 and fig 4.

Step Four: Repeat this process using the long mounting brackets for the rear body mounts fig 2.

Step Five: Place the side bars into position. Using the 1/2” x 2” bolts, 3” plastic rings, and 1/2” lock and flat

washers, loosely attach the side bars to the brackets. (NOTE: To determine which side bar is the left or right, Check

the number on the welded insert at the end of the tube.)

Step Six: Place the rear bolt plate through the body as shown in fig 3. Attach support bracket as shown in fig. 2

using supplied 3/8 hardware. Next attach front support brackets as shown in Fig. 1 using supplied 1/2” hardware on

the top bolt and 3/8” hardware on the bottom bolt

1 2 3

No comments

Dee-zee DZ371231 User Manual Page 2