Before returning this product to the store of purchaseContact Dee Zee if you experience the following problems: •MissingParts •Installat
Attached the mounting brackets [B] to the mounting locations with the previously installed U-nutsusing the 8mm x 25mm bolt [D].2Bracket [C] will be us
Once the brackets are in place, set the tube on the braces and adjust as necessary front to back.Look under the tube to determine which sets of slots
Set the tube back on the brackets and slide the U-nuts in the tube slots so that they alignwith the mounting slots in the braces. Repeat at all mount
Dee Zee Running Board Installation InstructionsCongratulations on your purchase of a quality Dee Zee product. Dee Zee isrecognized as having the highe
*** BOARD SOLD SEPARATELYX2B 2014LPX3BRACKET LEFT HANDCBRACKET RIGHT HANDNXT RUNNING BOARD INSTALLATION INSTRUCTIONDZ 16326 FORD SUPER DUTY 1999-CU
WRENCH/RATCHET13mmInstall the 8mm u-nut [E] as shown below.The driver's side crew cab is shown. The front of the vehicle is to the right of the
Attached the mounting brackets [B] to the mounting locations with the previously installed U-nutsusing the 8mm x 25mm bolt [D].2Bracket [C] will be us
Align the bolts in the channels on the underside of the running board with the slots in the mounting braces and loosley attach the board to the brace
Once the board location has been set, tighten the nuts holding the board to the braces usinga 13mm socket/wrench. 5Make sure all bolts are tightened.
*** TUBES SOLD SEPARATELYX2X36" OVAL SIDE STEP INSTALLTIONFORD SUPER DUTY 1999-CURRENTSIDE STEP TUBEA BCBRACKET RIGHT HANDBRACKET LEFT HANDX3F
WRENCH/RATCHET13mmInstall the 8mm u-nut [E] as shown below.The driver's side is crew cab is shown. The front of the vehicle is to the right of t
Comments to this Manuals