Dee-zee DZ2545 User Manual

Before returning this product to the store of purchaseContact Dee Zee if you experience the following problems:    •MissingParts   •Installat

Dee Zee Running Board Installation InstructionsCongratulations on your purchase of a quality Dee Zee product. Dee Zee isrecognized as having the highe

K2015PX2EC RSPX4B 1791PX4B 1988X4BRACKETB 81FXX4PN 87X4PN 70BX20PN 72BX44Dee Zee Rough Step Board Installation InstructionDZ 2545 Ford Van Front Doors

WRENCH/RATCHET3/8", 7/16"TAPEMEASURE3/16" DRILL BIT1/4" DRILL BITPre-assemble the end cap [B] and strap bracket [C] using two

Measure back from the front wheel well and mark the lower rocker panel at 18"and 30".This will be the approximate location for the rocker pa

Attach the rocker brackets [E] to the rocker panel with a ribneck carriage bolt [F],washer [H], and nut [I].Repeat this for each bracket location.5Onc

Drill a 3/16" hole through the slot in the back of brace into the bottom of the frame.Attach the channel brace to the frame using a sheet metal s

Place the running board on the angle braces. Adjust the board to make sure that it isstraight with the vehicle. The outside edge of the board should

Drill 1/4" holes up through the slots into the board at the locations shown below.Attach the running board to the angle brace using the hex head